Model:10962
貨號 |
產品名稱 |
描述 |
規格(個/盒) |
10961 |
灌流管,藍色,15cm管長,0.8mm內徑,10ml儲液管 |
Perfusion Set BLUE: length 15 cm, ID 0.8 mm, 10 ml reservoirs, designed for low flow rates |
4 |
10962 |
灌流管,紅色,15cm管長,1.6mm內徑,10ml儲液管 |
Perfusion Set RED: length 15 cm, ID 1.6 mm, 10 ml reservoirs, designed for high flow rates |
4 |
10963 |
灌流管,白色,50cm管長,0.8mm內徑,10ml儲液管 |
Perfusion Set WHITE: length 50 cm, ID 0.8 mm, 10 ml reservoirs, designed for low flow rates and microscopy |
4 |
10964 |
灌流管,黃綠色,50cm管長,1.6mm內徑,10ml儲液管 |
Perfusion Set YELLOW-and-GREEN: length 50 cm, ID 1.6 mm, 10 ml reservoirs, designed for high flow rates and microscopy |
4 |
10965 |
灌流管,黃色,15cm,0.5mm內徑,2ml儲液管 |
Perfusion Set YELLOW: length 15 cm, ID 0.5 mm, 2 ml reservoirs, designed for low volumes and µ-Slides with 0.1 mm channel height |
4 |
10966 |
灌流管,黑色,50cm,0.5mm內徑,2ml儲液管 |
Perfusion Set BLACK: length 50 cm, ID 0.5 mm, 2 ml reservoirs, designed for low volumes, µ-Slides with 0.1 mm channel height, and microscopy |
4 |
10967 |
灌流管,褐色,100cm,0.5mm內徑,2ml儲液管 |
Perfusion Set BROWN: length 100 cm, ID 0.5 mm, 2 ml reservoirs. Sterile and ready-to-use tubing sets for flow assays with the ibidi Pump System, individually packed. |
4 |
10968 |
灌流管,灰色,100cm,0.8mm內徑,10ml儲液管 |
Perfusion Set GREY: length 100 cm, ID 0.8 mm, 10 ml reservoirs. Sterile and ready-to-use tubing sets for flow assays with the ibidi Pump System, individually packed. |
4 |
10969 |
灌流管,橘色,100cm,1.6mm內徑,10ml儲液管 |
Perfusion Set ORANGE: length 100 cm, ID 1.6 mm, 10 ml reservoirs. Sterile and ready-to-use tubing sets for flow assays with the ibidi Pump System, individually packed. |
4 |
使用 ibidi 泵系統進行流量分析的即用型灌流管
包含管道和儲液管,可與 ibidi 通道載玻片和流體單元結合進行流量測定
用于各種流速和體積
無菌包裝、即用型
有關完整的 ibidi 泵系統的詳細信息,請參閱 ibidi 泵系統網站。
灌流管和 µ-Slide 載玻片的選擇
使用 ibidi 泵系統可實現的剪切力范圍取決于所選用的灌流管裝置和 µ-Slide載玻片的組合。
選擇指南
根據您所需的剪切力范圍和 µ-Slide 載玻片,為您的實驗找到最佳灌流管套裝:
低 (0–2 dyn) 中 (2–20 dyn) 高 (20–max dyn)
給定的剪切力范圍適用于 10% FCS 在 37°C (0.0072 dyn s/cm²) 的標準介質的粘度。 最小值壓力值為 5 mbar ,最大值為 95 mbar 。
ICP備案號: 滬ICP備15057650號-1 滬公網安備31011202005471 雷萌生物科技(上海)有限公司 保留所有版權.